Go Back

EVE Online: L4 Mission Bot - Part #10

Finally got around to working on Questor a bit again. You can view the change log here.

You can download the new version here

For now I'll keep adding blogs for each release, but I might just move that exclusively to the forums for Questor and keep this blog for 'other things'. For example, I'll be looking into Rift when it comes out. It looks fun, and I already played around with it a small bit.

Posted by: Da_Teach on Sunday, January 30, 2011  •  Comments (47)  •  Full story  •  EVE Online Inner Space Questor Bot

EVE Online: L4 Mission Bot - Part #9

It seems CCP has screwed around here and there and managed to break Questor. Damn you CCP! ;)

However, I think I've fixed the issues (ammo-change & stargate jumps). However if you still run into a problem, bug, or anything let me know using the comment section.

You can download the new version here.

Big note, new missions have been added to EVE and as such I recommend keeping a close eye on Questor.

Some of those new missions will need XML's or Questor will not be able to complete them.

Posted by: Da_Teach on Tuesday, January 18, 2011  •  Comments (69)  •  Full story  •  EVE Online Inner Space Questor Bot

EVE Online: L4 Mission Bot - Part #8

A minor update today bringing you a few new features/fixes:

  • Ability to change the bookmark prefix (e.g. Salvage:).
  • Questor now correctly identifies that your cloaked and no longer tries to activate its hardeners.
  • You can disable the 3D rendering in EVE Online, use at your own risk.
  • Added statistics logging at the end of each mission.

The statistics logging is a bit off, mainly due to the delayed bounty prizes. I'll look into a better version but for now it does give a basic run down on mission times. The time it measures is from the point where it starts the conversation with your agent, until it reaches 'Idle' state again (e.g. after everything is done).

Some people experienced crashes with Questor when it tried to accept missions. I *think* I have fixed that, however I'm not sure. I changed the way I read strings from EVE. In theory it shouldn't crash. However since I didn't experience the issue myself so I am not sure if it is fixed or not :)

You can download the new version here.

Posted by: Da_Teach on Sunday, January 16, 2011  •  Comments (22)  •  Full story  •  EVE Online Questor Bot

EVE Online: L4 Mission Bot - Part #7

I've finally finished the move from ISXEVE to DirectEve (my own code). This means Questor is now usable without an ISXEVE subscription. Note, Inner Space is still required!

Some of the changes:

  • Tractor beam's will deactivate if a wreck / cargo container is within 2500m
  • Wrecks will be unlocked if the ship has no salvager (just like cargo containers)
  • Afterburner / MWD will no longer turn off if your speed tanking and are still being attacked. Note that the old behavior will still be used if your not speed tanking (e.g. if your no longer approaching an entity, then ab/mwd will turn off)
  • Refactored the way Questor loots, it should handle lag better now.

I probably forgot to add some changes to the change log, so who knows what you will run into ;)

I've also decided to release a new utility called ValueDump. This utility has the ability to sell all the items in your hangar. Run it with 'dotnet valuedump' from the InnerSpace console. It will sell all items (or at least try) that are not in secure containers (like a station container). So move your ammo to safety!

By default this utility will not undersell items. Underselling is defined as 15% under median buy price (as returned by eve-central, cached in invitems.xml). This, however, is ignored if the combined value (item quantity * median buy price) is below 1.000.000 isk (its not worth the trouble of trying to sell it yourself).

You can download the new version here. Due to my work I have a lot less time to work on Questor at this moment (I was off the past 3 weeks :), so expect changes / updates to become a bit less frequent from now on. Sorry.

Posted by: Da_Teach on Tuesday, January 11, 2011  •  Comments (31)  •  Full story  •  EVE Online Inner Space Questor Bot

EVE Online: L4 Mission Bot - Part #6.1

It seems I had a small bug in the previous Questor release which made it not work for pretty much everyone from the US.

You can download the new version here.

I've fixed the bug with Questor not seeing the ships in the ship hangar correctly. If you are having issues with Questor not switching to your combat / salvage ship then redownload Questor and it *should* be fixed (no guarantees).

Posted by: Da_Teach on Saturday, January 1, 2011  •  Comments (47)  •  Full story  •  EVE Online Inner Space Questor Bot

EVE Online: L4 Mission Bot - Part #6

On the last day of this glorious year we are blessed with a new version of Questor. I recommend backing up your old version of Questor, just to be on the safe side. After you have installed this new version, make sure you edit your settings xml file! See the included settings xml file and the changelog.txt file and apply all the changes. One very important change is the renaming of activateShieldBooster into activateRepairModules. I will laugh at everyone that loses his ship due to not checking their settings xml file :D

Some of the changes I already talked about in a previous blog. But since then I added drone-reloading, salvager-spreading and auto logon. I think I added some other stuff as well, so be sure to check out the changelog.txt file that is included in the zip.

As with the previous version of Questor, ISXEVE and InnerSpace are still required.

The Hacker Within wishes you all a Happy New Year!

Posted by: Da_Teach on Friday, December 31, 2010  •  Comments (31)  •  Full story  •  EVE Online ISXEVE Inner Space Questor

EVE Online: L4 Mission Bot - Status Update

Since the last release of Questor, I have been busy adding features and fixing bugs.

In general I have mostly been adding more of my own python-access features, and removing / replacing ISXEVE. I've not fully completed this work yet, so expect the next version of Questor to still require ISXEVE.

Some of you have been requesting support for armor repairers and the new version will deliver. Or at least try to deliver, seeing as I have no armor tanking characters. But it should work in theory.

I've also added automatic window-closing. It will close all telecom messages (e.g. "you have entered bla bla bla"), and it will close the "not enough cargo space" messages (and a few others). This should help clear the window clutter that sometimes occurred.

One of the major fixes is that 300-400+ items no longer crash eve. I've had as many as 500 items in my hangar without issues. I've also added corp-hangar support, though it seems that causes issues at times (I'm investigating that).

I've added a capacitor 'fail safe', if you aren't being targeted and your capacitor is below 10%, it will not try to activate your hardeners. This was added to help the very rare occurrence of being out of cap at a star with Questor trying to reactivate your hardeners like there's no tomorrow (and as such never recharging any cap).

The arm-mode now tells you what its missing, instead of waiting till the end of time.

I've added a minimum shield and armor percentage to the drone settings, the bot will check both armor and shields before launching (or recalling) drones. This should help people that lost their drones due being under-tanked.

A few other things probably changed, but I cant remember what ;)

For now that's it, I expect this version to be ready in a few days and hopefully have a new release before the new year.

Posted by: Da_Teach on Monday, December 27, 2010  •  Comments (421)  •  Full story  •  EVE Online Questor

EVE Online: L4 Mission Bot - Part #5

A lot of people have been bugging me about an update to Questor and while I haven't fully decided yet if I want to release the source of PySharp and DirectEve (my custom libraries), I did decide that I wanted to release a new version of Questor.

So here it is, a new build of Questor, the user friendly version. Unpack the zip file to your ".NET Programs" folder in your InnerSpace directory.

To get started with this version, there are a few things you need to configure. Firstly, you need to rename the "rename_to_charname.xml" file to your charactername.xml, for example "IRBot.xml" if your char is called "IRBot".

Once that is done, you need to edit the XML file (any editor will do, even notepad), its a file which basically tells the bot which missions to accept, which ship(s) to use, what ammo to use, etc. I have added XML comments to each section. So you should be able to fill it in relatively easy.

Some of the sections contain id's, like type id and group id. These id's can be looked up in the InvTypes.xml file.

Once that is done, startup EVE with InnerSpace. Load up ISXEVE (at the moment its still required). And then load up Questor using "dotnet Questor" command in the InnerSpace console.

After that you'll get presented with a form with loads of different buttons. Normally there are only 2 interesting buttons. One is "Begin" and the other is "Auto 'BEGIN'" (ok not really a button). While there's more buttons, they are mostly there for testing.

If you filled in everything correctly in the settings XML file (e.g. "IRBot.xml"), then the bot should talk to your mission agent, accept a combat mission, fly to the mission, etc, etc, etc. The bot will decline all courier missions and decline missions in/into low-sec.

While the bot is able to automatically do all normal kill missions. Some missions require the bot to kill structures or pickup loot. These missions require (sadly enough) specialized mission-actions. I've included two sets, one for L4 Caldari Mission agents (might not be complete) and one for L4 Galente Missions (should be complete, at least was for my agent).

That in theory should be enough info to get you started. If you run into a bug or question, dont be afraid to leave a comment, however I'm not your help desk, stupid question as such will be ignored!

For all that missed the download link above, click here to download Questor.

Posted by: Da_Teach on Friday, November 26, 2010  •  Comments (293)  •  Full story  •  EVE Online C# ISXEVE Inner Space Questor Bot

EVE Online: L4 Mission Bot - Part #4.5

It's been a while since my last post, this has mostly been due to a very tight deadline I have at work. It's hard to keep up the blog when I'm even working in the weekends :(

However I have made a lot of progress with the bot. I wont upload a new source just yet (hence the 4.5-part instead of 5), mostly because I am waiting for the performance-release of ISXEVE. I'm beta testing the release and it still has some bugs, but as soon as those are gone then the new version of the mission bot will be released. Releasing it now would result in unacceptable performance (truly unacceptable!).

But to give you a bit of a heads up on what has been added since the last release:

  • Drone support, although it still loses drones in missions (The Mordus Headhunters eats up drones), the support works pretty darn good! :)
  • Loot-pickup support, this means it will check each can to see if the mission item is in there.
  • Full mission "scripting" support, allowing you to select what actions the bot will take in missions.
  • Priority-looting, using an XML with market-prices from eve-central the bot is able to dump less-valued loot and pickup more valuable loot.
  • Create salvage bookmarks (if a mission has more then x-wrecks left then it'll make a salvage bookmark for that mission pocket)
  • After-mission salvaging, the bot has the ability to jump into a salvage ship after completing a mission and visiting the bookmarks that it made to salvage (and loot) all the wrecks there.
  • Better ammo-support, you can have multiple types of ammo with multiple ranges, and it will pick the right type of ammo for the right range. (I will be adding additional options to this in later versions, to (for example) select rage-torps for battleships)
  • Speed tanking, when enabled the bot will orbit the target its attacking (it still has some bugs but works pretty well)
  • And most importantly: a settings-xml file which allows you to change any setting in the bot

There are still bugs in there, but its getting very close to perfect for combat missions. 

I hope that the ISXEVE performance update gets released soon, as I can't really release it like this. It would be too slow.

Posted by: Da_Teach on Wednesday, September 22, 2010  •  Comments (24)  •  Full story  •  EVE Online C# ISXEVE Inner Space Questor Bot

EVE Online : L4 Mission Bot - Part #4

Well after a weeks worth there is now partial support for pickup missions. The MissionController doesn't actually wait for loot (yet), nor will it check every can / wreck (yet), but it does pickup loot. But I got a bit annoyed by the performance issues with ISXEVE, so I decided to "motivate" the people behind ISXEVE a bit, perhaps more on that in a week (for now the motivator stays private).

I also squashed a couple of bugs here and there (like panic mode only working once).

This week its all about finishing support for pickup missions and start working on drone support.

Somewhere in between I will also look into using the right ammo for the mission (if the faction of the mission is known through either XML or mission information). Should not be 'that' hard.

Posted by: Da_Teach on Saturday, August 7, 2010  •  Comments (24)  •  Full story  •  EVE Online C# ISXEVE Inner Space Questor Bot

  1. 1
  2. 2
  3. Next page